Configuring The Line Rate - HP 4800G Series Configuration Manual

To do...
Enter
Enter
interface
interface
view
view or
port
Enter port
group
group
view
view
Configure GTS for a
queue
Configuration Example
Configure GTS on GigabitEthernet1/0/1, shaping the packets of queue 1 when the sending rate
exceeds 512 kbps.
# Enter system view.
<Sysname> system-view
# Enter interface view.
[Sysname] interface gigabitethernet 1/0/1
# Configure GTS parameters.
[Sysname-GigabitEthernet1/0/1] qos gts queue 1 cir 512

Configuring the Line Rate

Configuration Procedure
Follow these steps to configure the line rate:
To do...
Enter system view
Enter
Enter
interface
interface
view
view or
Enter port
port group
group
view
view
Configure the inbound
or outbound line rate for
the interface/port group
Configuration Example
Limit the outbound line rate of GigabitEthernet 1/0/1 to 512 kbps.
# Enter system view.
<Sysname> system-view
# Enter interface view.
Use the command...
interface interface-type
interface-number
port-group manual port-group-name
qos gts queue queue-number cir
committed-information-rate [ cbs
committed-burst-size ]
Use the command...
system-view
interface interface-type
interface-number
port-group manual port-group-name
qos lr outbound cir
committed-information-rate [ cbs
committed-burst-size ]
4-7
Remarks
Use either command
Settings in interface view take
effect on the current interface;
settings in port group view take
effect on all ports in the port
group.
Required
Remarks
—
Use either command
Settings in interface view take
effect on the current interface;
settings in port group view take
effect on all ports in the port
group.
Required