Configuring The Maximum Number Of Equal-Cost Routes For Load-Balancing - HP 4800G Series Configuration Manual

To do...
Enter IPv6 address family view
Enable IPv6 BGP route refresh
for a peer/peer group
Perform a manual soft-reset
If the peer does not support route-refresh, you can use the peer keep-all-routes command to save all
the route updates from the peer, and then use the refresh bgp ipv6 multicast command to soft-reset
IPv6 MBGP connections to refresh the IPv6 MBGP routing table and apply the new policy without
tearing down IPv6 MBGP connections.
Follow these steps to perform a manual soft-reset
To do...
Enter system view
Enter BGP view
Enter IPv6 MBGP address
family view
Keep all routes from a
peer/peer group regardless of
whether they pass the inbound
filtering policy
Exit to user view
Soft-reset IPv6 MBGP
connections manually

Configuring the Maximum Number of Equal-Cost Routes for Load-Balancing

Follow these steps to configure the maximum number of equal-cost routes for load-balancing:
To do...
Enter system view
Enter BGP view
Enter IPv6 MBGP address
family view
Configure the maximum
number of equal-cost routes for
load balancing
Use the command...
ipv6-family
peer { ipv6-group-name |
ipv6-address }
capability-advertise
route-refresh
Use the command...
system-view
bgp as-number
ipv6-family multicast
peer { ipv6-group-name |
ipv6-address } keep-all-routes
return
refresh bgp ipv6 multicast
{ all | ipv6-address | group
ipv6-group-name | external |
internal } { export | import }
Use the command...
system-view
bgp as-number
ipv6-family multicast
balance number
1-11
Remarks
—
Optional
Enabled by default
Remarks
—
—
—
Required
Not kept by default
—
Optional
Remarks
—
—
—
Required
By default, load balancing is
disabled.