Configuring Basic Functions Of Mld Snooping; Configuration Prerequisites; Enabling Mld Snooping - HP 4800G Series Configuration Manual

Configurations made in MLD Snooping view are effective for all VLANs, while configurations made
in VLAN view are effective only for ports belonging to the current VLAN. For a given VLAN, a
configuration made in MLD Snooping view is effective only if the same configuration is not made in
VLAN view.
Configurations made in MLD Snooping view are effective for all ports; configurations made in
Ethernet port view are effective only for the current port; configurations made in Layer 2 aggregate
port view are effect only for the current port; configurations made in port group view are effective
only for all the ports in the current port group. For a given port, a configuration made in MLD
Snooping view is effective only if the same configuration is not made in Ethernet port view, Layer 2
aggregate port view or port group view.
For MLD Snooping, configurations made on a Layer 2 aggregate port do not interfere with
configurations made on its member ports, nor do they take part in aggregation calculations;
configurations made on a member port of the aggregate group will not take effect until it leaves the
aggregate group.

Configuring Basic Functions of MLD Snooping

Configuration Prerequisites

Before configuring the basic functions of MLD Snooping, complete the following tasks:
Configure the corresponding VLANs
Before configuring the basic functions of MLD Snooping, prepare the following data:
The version of MLD Snooping

Enabling MLD Snooping

Follow these steps to enable MLD Snooping:
To do...
Enter system view
Enable MLD Snooping globally
and enter MLD Snooping view
Return to system view
Enter VLAN view
Enable MLD Snooping in the
VLAN
Use the command...
system-view
mld-snooping
quit
vlan vlan-id
mld-snooping enable
1-7
Remarks
—
Required
Disabled by default
—
—
Required
Disabled by default