Pim Configuration Examples; Pim-Dm Configuration Example - HP FlexFabric 5950 series Configuration Manual

PIM-SM domain.
Display statistics for PIM packets.

PIM configuration examples

PIM-DM configuration example

Network requirements
As shown in
•
OSPF runs on the network.
•
VOD streams are sent to receiver hosts in multicast. The receiver groups of different
organizations form stub networks, and one or more receiver hosts exist on each stub network.
•
The entire PIM domain operates in the dense mode.
•
Host A and Host C are multicast receivers on two stub networks.
•
IGMPv2 runs between Switch A and N1, and between Switch B, Switch C, and N2.
Figure 55 Network diagram
Source
10.110.5.100/24
Table 9 Interface and IP address assignment
Device
Switch A
Switch A
Switch B
Switch B
Switch C
Figure 55:
Vlan-int300 Vlan-int101
Switch D
PIM-DM
Interface IP address
Vlan-int100 10.110.1.1/24
Vlan-int103 192.168.1.1/24
Vlan-int200 10.110.2.1/24
Vlan-int101 192.168.2.1/24
Vlan-int200 10.110.2.2/24
[ group-address ]
display pim statistics
Switch A
Vlan-int100
Vlan-int200
Vlan-int101
Switch B
Vlan-int200
Switch C
Device
Switch C
Switch D
Switch D
Switch D
Switch D
151
Receiver
Host A
Host B
Receiver
Host C
Host D
Interface IP address
Vlan-int102 192.168.3.1/24
Vlan-int300 10.110.5.1/24
Vlan-int103 192.168.1.2/24
Vlan-int101 192.168.2.2/24
Vlan-int102 192.168.3.2/24