To do...
Enter system view
Enter interface view
Configure graft retry period
For the configuration of other timers in PIM-DM, refer to
Configuring PIM-SM
PIM-SM Configuration Task List
Complete these tasks to configure PIM-SM:
Configuring PIM-SM
Configuring an RP
Configuring a BSR
Configuring Administrative Scoping
Configuring Multicast Source Registration
Disabling SPT Switchover
Configuring PIM Common Features
Configuration Prerequisites
Before configuring PIM-SM, complete the following task:
Configure any unicast routing protocol so that all devices in the domain are interoperable at the
network layer.
Use the command...
system-view
interface interface-type
interface-number
pim timer graft-retry interval
Configuring PIM Common
Task
Configuring a static RP
Configuring a C-RP
Enabling auto-RP
Configuring C-RP timers globally
Configuring a C-BSR
Configuring a PIM domain border
Configuring global C-BSR parameters
Configuring C-BSR timers
Enabling administrative scoping
Configuring an admin-scope zone boundary
Configuring C-BSRs for each admin-scope
zone and the global-scope zone
1-17
Remarks
—
—
Optional
3 seconds by default
Timers.
Remarks
Required
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional