Ipv6 Multicast Vlan Configuration; Introduction To Ipv6 Multicast Vlan - HP 4800G Series Configuration Manual

1

IPv6 Multicast VLAN Configuration

When configuring IPv6 multicast VLAN, go to these sections for information you are interested in:

Introduction to IPv6 Multicast VLAN

IPv6 Multicast VLAN Configuration Task List
Configuring IPv6 Sub-VLAN-Based IPv6 Multicast VLAN
Configuring Port-Based IPv6 Multicast VLAN
Displaying and Maintaining IPv6 Multicast VLAN
IPv6 Multicast VLAN Configuration Examples
Introduction to IPv6 Multicast VLAN
As shown in Figure
A, Host B and Host C, belonging to different VLANs require IPv6 multicast programs on demand service,
the Layer 3 device, Router A, needs to forward a separate copy of the multicast traffic in each user
VLAN to the Layer 2 device, Switch A. This results in not only waste of network bandwidth but also extra
burden on the Layer 3 device.
Figure 1-1 Multicast transmission without IPv6 multicast VLAN
The IPv6 multicast VLAN feature configured on the Layer 2 device is the solution to this issue. With the
IPv6 multicast VLAN feature, the Layer 3 device needs to replicate the multicast traffic only in the IPv6
multicast VLAN instead of making a separate copy of the multicast traffic in each user VLAN. This saves
the network bandwidth and lessens the burden of the Layer 3 device.
The IPv6 multicast VLAN feature can be implemented in two approaches, as described below:
Sub-VLAN-based IPv6 multicast VLAN
As shown in Figure
configure VLAN 10 as an IPv6 multicast VLAN, configure all the user VLANs as sub-VLANs of this IPv6
multicast VLAN, and enable MLD snooping in the IPv6 multicast VLAN.
1-1, in the traditional IPv6 multicast programs-on-demand mode, when hosts, Host
1-2, Host A, Host B and Host C are in three different user VLANs. On Switch A,
1-1