Configuring Route Exchange Between A Mce And A; Configuring To Use Static Routes Between A Mce And A - HP 4800G Series Configuration Manual

In a VPN instance with BGP enabled, the BGP route exchange is processed in the same way as those
in a normal BGP-enabled network.
Configuring Route Exchange between a MCE and a PE
Configuring Route Exchange between a MCE and a PE
Complete the following tasks to configure route exchange between a MCE and a PE:
Configuring to Use Static Routes between a MCE and a PE
Configuring to Use RIP between a MCE and a PE
Configuring to Use OSPF between a MCE and a PE
Configure to Use IS-IS between a MCE and a PE
Configure to Use EBGP between a MCE and a PE
Configuring to Use Static Routes between a MCE and a PE
Follow these steps to define a static route for a VPN instance:
To do...
Enter system view
Define a static
route for a VPN
instance
Set the default
preference value
of static routes
Task
Use the command...
system-view
ip route-static dest-address { mask | mask-length }
{ gateway-address | interface-type
interface-number [ gateway-address ] |
vpn-instance d-vpn-instance-name
gateway-address } [ preference preference-value ]
[ tag tag-value ] [ description description-text ]
ip route-static vpn-instance
s-vpn-instance-name&<1-6> dest-address { mask |
mask-length } { gateway-address [ public ] |
interface-type interface-number
[ gateway-address ] | vpn-instance
d-vpn-instance-name gateway-address }
[ preference preference-value ] [ tag tag-value ]
[ description description-text ]
ip route-static default-preference
default-preference-value
You can choose one or multiple
configurations as required.
2-8
Remarks
Remarks
—
Required
By default, for a static
route, the preference
value is 60, the tag value
is 0, and no description
information is
configured.
Optional
By default, the
preference value of a
static route is 60.