Configuring An Sftp Client; Configuring The Sftp Connection Idle Timeout Period; Specifying A Source Ip Address Or Interface For The Sftp Client; Establishing A Connection To The Sftp Server - HP 4800G Series Configuration Manual

When the device functions as the SFTP server, only one client can access the SFTP server at a time. If
the SFTP client uses WinSCP, a file on the server cannot be modified directly; it can only be
downloaded to a local place, modified, and then uploaded to the server.

Configuring the SFTP Connection Idle Timeout Period

Once the idle period of an SFTP connection exceeds the specified threshold, the system automatically
tears the connection down, so that a user cannot occupy a connection for nothing.
Follow these steps to configure the SFTP connection idle timeout period:
To do...
Enter system view
Configure the SFTP connection
idle timeout period

Configuring an SFTP Client

Specifying a Source IP Address or Interface for the SFTP Client

You can configure a client to use only a specified source IP address or interface to access the SFTP
server, thus enhancing the service manageability.
Follow these steps to specify a source IP address or interface for the SFTP client:
To do...
Enter system view
Specify a
source IP
address or
interface for
the SFTP
client

Establishing a Connection to the SFTP Server

This configuration task is to enable the SFTP client to establish a connection with the remote SFTP
server and enter SFTP client view.
Follow these steps to enable the SFTP client:
Use the command...
system-view
sftp server idle-timeout
time-out-value
Use the command...
system-view
Specify a source sftp client source { ip
IPv4 address or ip-address | interface
interface for the
interface-type
SFTP client interface-number }
Specify a source
sftp client ipv6 source
IPv6 address or
{ ipv6 ipv6-address |
interface for the
interface interface-type
SFTP client
interface-number }
—
Optional
10 minutes by default
—
Required
Use either command.
By default, an SFTP client uses
the interface address specified
by the route of the device to
access the SFTP server.
2-2
Remarks
Remarks