HP 4800G Series Configuration Manual page 995

To do...
View MLD configuration and
running information on the
specified interface or all
MLD-enabled interfaces
View the information of the
MLD proxying groups
View the information of the
MLD routing table
View MLD SSM mappings
View the IPv6 multicast group
information created based on
the configured MLD SSM
mappings
Clear MLD multicast group
information
Clear Layer 2 port information
about MLD multicast groups
Clear MLD SSM mappings
You cannot use the reset mld group command to clear the MLD multicast group information of
static joins.
The reset mld group port-info command cannot clear Layer 2 port information about MLD
multicast groups of static joins.
The reset mld group command cause an interruption of receivers' reception of multicast data.
Use the command...
display mld interface [ interface-type
interface-number ] [ verbose ]
display mld proxying group [ group-address ]
[ verbose ]
display mld routing-table [ ipv6-source-address
[ prefix-length ] | ipv6-group-address [ prefix-length ] ]
*
display mld ssm-mapping ipv6-group-address
display mld ssm-mapping group
[ ipv6-group-address | interface interface-type
interface-number ] [ verbose ]
reset mld group { all | interface interface-type
interface-number { all | ipv6-group-address
[ prefix-length ] [ ipv6-source-address
[ prefix-length ] ] } }
reset mld group port-info { all |
ipv6-group-address } [ vlan vlan-id ]
reset mld ssm-mapping group { all | interface
interface-type interface-number { all |
ipv6-group-address [ prefix-length ]
[ ipv6-source-address [ prefix-length ] ] } }
1-20
Remarks
Available
in any view
Available
in any view
Available
in any view
Available
in any view
Available
in any view
Available
in user
view
Available
in user
view
Available
in user
view