HP 4800G Series Configuration Manual page 1045

Hash mask length: 128
State: Accept Preferred
Uptime: 00:04:22
Expires: 00:01:46
# View the BSR information and the locally configured C-RP information in effect on Switch D.
[SwitchD] display pim ipv6 bsr-info
Elected BSR Address: 1003::2
Priority: 20
Hash mask length: 128
State: Elected
Uptime: 00:05:26
Expires: 00:01:45
Candidate BSR Address: 4002::1
Priority: 10
Hash mask length: 128
State: Candidate
Candidate RP: 4002::1(Vlan-interface105)
Priority: 0
HoldTime: 130
Advertisement Interval: 60
Next advertisement scheduled at: 00:00:48
# View the BSR information and the locally configured C-RP information in effect on Switch E.
[SwitchE] display pim ipv6 bsr-info
Elected BSR Address: 1003::2
Priority: 20
Hash mask length: 128
State: Elected
Uptime: 00:01:10
Next BSR message scheduled at: 00:01:48
Candidate BSR Address: 1003::2
Priority: 20
Hash mask length: 128
State: Elected
Candidate RP: 1003::2(Vlan-interface102)
Priority: 0
HoldTime: 130
Advertisement Interval: 60
Next advertisement scheduled at: 00:00:48
To view the RP information discovered on a switch, use the display pim ipv6 rp-info command. For
example:
# View the RP information on Switch A.
[SwitchA] display pim ipv6 rp-info
PIM-SM BSR RP information:
prefix/prefix length: FF0E::101/64
RP: 4002::1
1-40