Configuration Procedure - HP 4800G Series Configuration Manual

Configuration Procedure

Follow these steps to configure IPv6 IS-IS routing information control:
To do...
Enter system view
Enter IS-IS view
Define the priority for IPv6
IS-IS routes
Configure an IPv6 IS-IS
summary route
Generate an IPv6 IS-IS
default route
Configure IPv6 IS-IS to filter
incoming routes
Configure IPv6 IS-IS to
redistribute routes from
another routing protocol
Configure the maximum
number of redistributed Level
1/Level 2 IPv6 routes
Configure the filtering of
outgoing redistributed routes
Enable route leaking
Specify the maximum number
of equal-cost load balanced
routes
Use command to...
system-view
isis [ process-id ]
ipv6 preference { route-policy
route-policy-name | preference } *
ipv6 summary ipv6-prefix prefix-length
[ avoid-feedback |
generate_null0_route | [ level-1 |
level-1-2 | level-2 ] | tag tag ] *
ipv6 default-route-advertise [ [ level-1 |
level-2 | level-1-2 ] | route-policy
route-policy-name ] *
ipv6 filter-policy { acl6-number |
ipv6-prefix ipv6-prefix-name |
route-policy route-policy-name } import
ipv6 import-route protocol [ process-id ]
[ allow-ibgp ] [ cost cost | [ level-1 |
level-2 | level-1-2 ] | route-policy
route-policy-name | tag tag ] *
ipv6 import-route limit number
ipv6 filter-policy { acl6-number |
ipv6-prefix ipv6-prefix-name |
route-policy route-policy-name } export
[ protocol [ process-id ] ]
ipv6 import-route isisv6 level-2 into
level-1 [ filter-policy { acl6-number |
ipv6-prefix ipv6-prefix-name |
route-policy route-policy-name } | tag
tag ] *
ipv6 maximum load-balancing number
1-3
Remarks
––
––
Optional
15 by default
Optional
Not configured by
default
Optional
No IPv6 default route
is defined by default.
Optional
No filtering policy is
defined by default
Optional
Not configured by
default
Optional
6144 by default
Optional
Not configured by
default
Optional
Not enabled by default
Optional
4 by default