Irf Fabric Configuration Examples; Lacp Mad Detection-Enabled Irf Configuration Example (With Two Member Switches) - HP A7503 Configuration Manual

To do...
Display the load sharing criteria
for IRF links
Display the master/slave
switchover states of a members of
an IRF fabric
Display configuration information
about MAD detection

IRF fabric configuration examples

LACP MAD detection-enabled IRF configuration example (with
two member switches)
Network requirements
The number of PCs on the enterprise network (see
on the access switches. To address business growth, increase the number of ports at the access layer
while protecting the present investments of the customer and ensuring ease of management and
maintenance.
Figure 14 Network diagram
GE1/4/0/2
Device A
Configuration considerations
To increase the number of access ports, you must add extra devices. In this example, Device B is
•
added.
Use the command...
display irf-port load-sharing mode
[ irf-port
[ member-id/port-number ] ] [ |
{ begin | exclude | include }
regular-expression ]
display switchover state [ chassis
chassis-number slot slot-number ]
[ | { begin | exclude | include }
regular-expression ]
display mad [ verbose ] [ | { begin
| exclude | include }
regular-expression ]
Device C
GE4/0/1 GE4/0/2
IRF
XGE1/3/0/1 XGE2/3/0/1
(IRF-port1/2) (IRF-port2/1)
Figure 14) is outgrowing the number of ports available
IP network
GE2/4/0/2
Device B
34
Remarks
Available in any view
Available in any view
Available in any view