Configuring Basic Functions Of Igmp; Configuration Prerequisites - HP 4800G Series Configuration Manual

Configuring Basic Functions
of IGMP
Adjusting IGMP
Performance
Configuring IGMP SSM
Mapping
Configuring IGMP Proxying
Configurations performed in IGMP view are effective on all interfaces, while configurations
performed in interface view are effective on the current interface only.
If a feature is not configured for an interface in interface view, the global configuration performed in
IGMP view will apply to that interface. If a feature is configured in both IGMP view and interface
view, the configuration performed in interface view will be given priority.

Configuring Basic Functions of IGMP

Configuration Prerequisites

Before configuring the basic functions of IGMP, complete the following tasks:
Configure any unicast routing protocol so that all devices in the domain are interoperable at the
network layer.
Configure PIM-DM or PIM-SM
Before configuring the basic functions of IGMP, prepare the following data:
IGMP version
Multicast group and multicast source addresses for static group member configuration
ACL rule for multicast group filtering
The maximum number of multicast groups that can be joined on an interface
Task
Enabling IGMP
Configuring IGMP Versions
Configuring Static Joining
Configuring a Multicast Group Filter
Configuring the Maximum Number of Multicast
Groups on an Interface
Configuring IGMP Message Options
Configuring IGMP Query and Response
Parameters
Configuring IGMP Fast Leave Processing
Enabling SSM Mapping
Configuring SSM Mappings
Enabling IGMP Proxying
Configuring Multicast Forwarding on a
Downstream Interface
1-8
Remarks
Required
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional