HP 4800G Series Configuration Manual page 1071

[SwitchA-bgp-af-ipv6-mul] quit
[SwitchA-bgp] quit
# On Switch B, configure the IPv6 MBGP peers and redistribute OSPF routes.
[SwitchB] ipv6
[SwitchB] bgp 200
[SwitchB-bgp] router-id 2.2.2.2
[SwitchB-bgp] ipv6-family
[SwitchB-bgp-af-ipv6] peer 1001::1 as-number 100
[SwitchB-bgp-af-ipv6] import-route ospfv3 1
[SwitchB-bgp-af-ipv6] quit
[SwitchB-bgp] ipv6-family multicast
[SwitchB-bgp-af-ipv6-mul] peer 1001::1 enable
[SwitchB-bgp-af-ipv6-mul] import-route ospfv3 1
[SwitchB-bgp-af-ipv6-mul] quit
[SwitchB-bgp] quit
6) Verify the configuration
You can use the display bgp ipv6 multicast peer command to display IPv6 MBGP peers on a switch.
For example, display IPv6 MBGP peers on Switch B.
[SwitchB] display bgp ipv6 multicast peer
BGP local router ID : 2.2.2.2
Local AS number : 200
Total number of peers : 3
Peer V AS
1001::1 4 100
MsgRcvd MsgSent OutQ PrefRcv Up/Down
56 56
1-18
Peers in established state : 3
0 0 00:40:54 Established
State