Download  Print this page
   

Advertisement

Read Me First
for the HP ProCurve Series 4100gl Switches - Software Version G.07.xx
Contents
About Your HP ProCurveProCurve Series 4100gl Switch Manual Set . . . . . . . . . . . . . . . . . . . . .
Software Updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Your Ticket to Proactive Networking! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Saving the Configuration After Installing or Exchanging a Module. . . . . . . . . . . . . . . . . . . . . . .
Transceiver Operation Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
mini-GBIC Operation Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Time Zone Issue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
About Your HP ProCurve Series 4100gl Switch Manual Set
The switch manual set includes the following:
Document
Read Me First (this document)
Installation and Getting Started Guide
Management and Configuration Guide
1
Access Security Guide
Release Notes (for software updates)
1
The latest edition is always available in PDF format and downloadable at
2
The Product Documentation CD-ROM shipped with your switch.
How To Read or Print Manuals Included On the CD-ROM
To access manuals included on the CD (in PDF format), use the Adobe® Acrobat® Reader. For PCs,
you will need version 4.0 (or greater) of the Reader. If you do not already have this version on your
PC, you can download it from the Adobe web site at http://www.adobe.com.
For MAC and UNIX® Platforms. You can download a Reader from the Adobe web site at
http://www.adobe.com.
Available on the HP
ProCurve Web Site
1
Yes
1
Yes
1
Yes
Yes
1
Yes
Shipped With
the Switch
Hardcopy
2
Hardcopy and CD
2
CD
2
CD
2
CD
http://www.hp.com/go/hpprocurve
.
1

Advertisement

Table of Contents

   Also See for HP ProCurve Series

   Summary of Contents for HP ProCurve Series

  • Page 1: Table Of Contents

    HP ProCurve Series 4100gl Switches – Software Version G.07.xx Contents About Your HP ProCurveProCurve Series 4100gl Switch Manual Set ..... .page 1 Software Updates .
  • Page 2: Software Updates

    Your Ticket to Proactive Networking! HP ProCurve Manager and HP ProCurve Manager Plus are breakthroughs in network management software that give you more network with less work. For more information, visit the HP ProCurve http://www.hp.com/go/hpprocurve and click on products index (in the sidebar), then locate web site at HP ProCurve Manager and Manager Plus under the Network management bar.
  • Page 3: Saving The Configuration After Installing Or Exchanging A Module

    Saving the Configuration After Installing or Exchanging a Module The following cases automatically result in a change to the running-configuration on your switch: If you replace a module with another module of a different type and then reboot the switch If you install a module in a slot that has not previously been used (including when you install a module and apply power to the switch for the first time) If you want to save such changes to permanent memory (startup-configuration), use switch console...
  • Page 4: Transceiver Operation Notes

    There are five different kinds of transceivers, including the Gigabit Stacking Transceiver that comes in the Gigabit Stacking Kit (J4116A), that can be installed in the HP ProCurve Switch Gigabit Transceiver gl Module (J4864A). This module can be used with your Series 4100gl Switch.
  • Page 5 For more information on transceivers and the transceiver module, see the documentation provided with the transceivers and the module and also available on the Documentation CD-ROM provided with your HP Series 4100gl Switch. For the latest version of HP switch documentation, visit http://www.hp.com/go/hpprocurve. (Click on technical support, then Product manuals.)
  • Page 6: Mini-gbic Operation Notes

    Connecting the Transceivers to Devices with Fixed Configurations. For some older network devices, including some older HP ProCurve devices, the default for the Gigabit-SX and -LX ports is a fixed configuration, for example 1000 Mbps/Full Duplex, or is otherwise different from these default configurations for the transceivers.
  • Page 7: Using Trunking With The Gig-t/gbic Gl Modulestack Management Issue

    Group1: 1-5, 7-11, 16 Group2: 6, 12-15, 17-22 Trunk groups must be created with ports from the same group, Group1 or Group2. See the HP ProCurve Switch gl Modules Installation Guide for more information. Release G.07.41 (or greater) of the switch software is required in the HP ProCurve Series 4100gl Switches to support the HP ProCurve Gig-T/GBIC gl Module (J4098A).
  • Page 8: Time Zone Issue

    Time Zone for TimeP or SNTP configuration has been corrected. Previous switch software, for all HP ProCurve switches, used positive time offset values for time zones that are West of GMT and negative values for times zones that are East of GMT. The standards indicate that time zones West of GMT should be designated by negative offset values, and time zones East of GMT by positive values.

This manual is also suitable for:

Procurve 4100gl

Comments to this Manuals

Symbols: 0
Latest comments: