Configuring Route Exchange Between A Mce And A Site; Configuring To Use Static Routes Between A Mce And A Site - HP 4800G Series Configuration Manual

To do...
Enter system view
Enter VPN instance view
Associate the current VPN
instance with one or multiple
VPN targets
Configure the maximum
number of routes a VPN
instance can accommodate
Apply a route policy for the
routes received
Apply a route policy for the
routes to be advertised
This attribute can be advertised with a route only when BGP runs between the MCE and the PE.
Otherwise, this attribute is of no sense.
The VPN target specified for a VPN instance on the MCE device must be same as that specified for
the VPN instance on the PE device.

Configuring Route Exchange between a MCE and a Site

Configuring Route Exchange between a MCE and a Site
Complete the following tasks to configure route exchange between a MCE and a site:

Configuring to Use Static Routes between a MCE and a Site

Configuring to Use RIP between a MCE and a Site
Configuring to Use OSPF between a MCE and a Site
Configuring to Use IS-IS between a MCE and a Site
Configuring to Use EBGP between a MCE and a Site
Configuring to Use Static Routes between a MCE and a Site
Follow these steps to configure static routes between a MCE and a site:
Use the command...
system-view
ip vpn-instance
vpn-instance-name
vpn-target vpn-target&<1-8>
[ both | export-extcommunity
| import-extcommunity ]
routing-table limit number
{ warn-threshold |
simply-alert }
import route-policy
route-policy
export route-policy
route-policy
Task
2-3
Remarks
—
—
Required
By default, a VPN instance has
no VPN target associated with
it.
Optional
Not configured by default
Optional
By default, all routes matching
the VPN target attribute are
permitted.
Optional
By default, all routes matching
the VPN target attribute are
permitted.
Remarks
You can choose one or
multiple configurations as
required.