Advertising A Default Route To A Peer Or Peer Group; Configure Outbound Ipv6 Mbgp Route Filtering - HP 4800G Series Configuration Manual

Follow these steps to configure IPv6 MBGP route summarization:
To do...
Enter system view
Enter BGP view
Enter IPv6 MBGP address
family view
Configure manual route
summarization

Advertising a Default Route to a Peer or Peer Group

Follow these steps to advertise a default route to a peer or peer group
To do...
Enter system view
Enter BGP view
Enter IPv6 MBGP address
family view
Advertise a default route to an
IPv6 MBGP peer or peer group
With the peer default-route-advertise command executed, the router sends a default route with the
next hop being itself to the specified IPv6 MBGP peer/peer group, regardless of whether the default
route is available in the routing table.

Configure Outbound IPv6 MBGP Route Filtering

Follow these steps to configure outbound IPv6 MBGP route filtering:
To do...
Enter system view
Enter BGP view
Enter IPv6 MBGP address
family view
Use the command...
system-view
bgp as-number
ipv6-family multicast
aggregate ipv6-address prefix-length
[ as-set | attribute-policy
route-policy-name | detail-suppressed |
origin-policy route-policy-name |
suppress-policy route-policy-name ]*
Use the command...
system-view
bgp as-number
ipv6-family multicast
peer { ipv6-group-name | ipv6-address }
default-route-advertise [ route-policy
route-policy-name ]
Use the command...
system-view
bgp as-number
ipv6-family multicast
1-5
Remarks
—
—
—
Required
Not configured by
default.
Remarks
—
—
—
Required
Not advertised by
default
Remarks
—
—
—