HP 4800G Series Configuration Manual page 981

Field
QQIC
Number of Sources
Source Address( i )
MLD report message
A host sends an MLD report message to report the current multicast listening state
format of an MLD report message.
Figure 1-4 Format of MLDv2 report message
Table 1-2 describes the fields in
Table 1-2 Description on fields in an MLDv2 report message
Field
Type = 143
Reserved
Checksum
Number of Multicast Address Records
Querier's Query Interval Code
This field is set to 0 in a general query message or a
multicast-address-specific query message.
This field represents the number of source addresses in a
multicast-address-and-source-specific query message
IPv6 multicast source address in a multicast-address-specific
query message (i = 1, 2, .., n, where n represents the number of
multicast source addresses.)
Figure 1-4.
Message type. For a report message, this field is set to
143.
The Reserved fields are set to 0 on transmission and
ignored on reception.
Standard IPv6 checksum
This field indicates how many IPv6 multicast address
records are present in this report message.
1-6
Description
Figure 1-4
Description
shows the