Smart Link Configuration Examples; Single Smart Link Group Configuration Example - HP 4800G Series Configuration Manual

To do...
Display information about the
received flush messages
Clear the statistics about flush
messages

Smart Link Configuration Examples

Single Smart Link Group Configuration Example

Network requirements
As shown in Figure 1-2:
Map VLANs 1 through 10, VLANs 11 through 20, and VLANs 21 through 30 to MSTI 0, MSTI 1, and
MSTI 2 respectively.
Traffic of VLANs 1 through 30 on Device C and Device D are dually uplinked to Device A.
Configure Smart Link on the devices for dual uplink backup, using VLAN 1 (the default) for flush
update.
Figure 1-2 Single smart link group configuration
Configuration procedure
1) Configuration on Device C
# Create VLANs 1 through 30, map VLANs 1 through 10, VLANs 11 through 20, and VLANs 21 through
30 to MSTI 0, MSTI 1, and MSTI 2 respectively, and activate the MST region configuration.
<DeviceC> system-view
[DeviceC] vlan 1 to 30
[DeviceC] stp region-configuration
[DeviceC-mst-region] instance 0 vlan 1 to 10
[DeviceC-mst-region] instance 1 vlan 11 to 20
[DeviceC-mst-region] instance 2 vlan 21 to 30
[DeviceC-mst-region] active region-configuration
[DeviceC-mst-region] quit
Use the command...
display smart-link flush
reset smart-link statistics
1-10
Remarks
Available in any view
Available in user view