Displaying And Maintaining 802.1X; 802.1X Authentication Configuration Example; Network Requirements - HP 5500 HI Series Configuration Manual

Step
2. Specify a set of domain name
delimiters for 802.1X users.
NOTE:
If you configure the access device to include the domain name in the username sent to the RADIUS server,
make sure the domain delimiter in the username can be recognized by the RADIUS server. For username
format configuration, see the user-name-format command in

Displaying and maintaining 802.1X

Task
Display 802.1X session
information, statistics, or
configuration information of
specified or all ports.
Clear 802.1X statistics.

802.1X authentication configuration example

Network requirements

As shown in
GigabitEthernet 1/0/1. Implement MAC-based access control on the port, so the logoff of one user does
not affect other online 802.1X users.
Use RADIUS servers to perform authentication, authorization, and accounting for the 802.1X users. If
RADIUS authentication fails, perform local authentication on the access device. If RADIUS accounting
fails, the access device logs the user off.
Configure the host at 10.1.1.1/24 as the primary authentication and accounting servers, and the host at
10.1.1.2/24 as the secondary authentication and accounting servers. Assign all users to the ISP domain
aabbcc.net, which accommodates up to 30 users.
Configure the shared key as name for packets between the access device and the authentication server,
and the shared key as money for packets between the access device and the accounting server.
Figure 29, the access device performs 802.1X authentication for users that connect to port
Command
dot1x domain-delimiter string
Command
display dot1x [ sessions | statistics ]
[ interface interface-list ] [ | { begin | exclude
| include } regular-expression ]
reset dot1x statistics [ interface interface-list ]
91
Remarks
Optional.
By default, only the at sign (@)
delimiter is supported.
Security Command Reference
Remarks
Available in any view
Available in user view
.