Directory Operations - HP 4800G Series Configuration Manual

Format
path/file-name
drive:/[path]/file-
name
For the S5500-EI series, when you specify a configuration file (.cfg file), startup file (.bin file), or Boot
ROM file by inputting its name in the format of drive:/[path]/file-name), the total length of the name
cannot exceed 63 characters.

Directory Operations

Directory operations include creating/removing a directory, displaying the current working directory,
displaying the specified directory or file information, and so on.
Displaying directory information
To do...
Display directory or file
information
Displaying the current working directory
To do...
Display the current working
directory
Description
Specifies a file in the specified
folder under the current
working directory. path
represents the folder name.
You can specify multiple
folders, indicating a file under a
multi-level folder.
Specifies a file in the specified
storage medium on the device.
drive represents the storage
medium name. The S5500-EI
series switches use flashes as
their storage media. The
storage medium on the master
is flash; the storage medium on
a slave is slot2#flash, where 2
represents the member ID of
the slave. You can use the
display irf command to view
the correspondence between a
device and its member ID.
Use the command...
dir [ /all ] [ file-url ]
Use the command...
pwd
Length
1 to 135
characters
1 to 135
characters
Required
Available in user view
Required
Available in user view
1-2
Example
test/a.txt: Indicates that a file
named a.txt is in the test folder
under the current working
directory.
flash:/test/a.txt: Indicates that a
file named a.txt is in the test
folder under the root directory
of the flash memory on the
master.
To read and write the a.txt file
under the root directory of the
flash on a slave (with the
member ID 2), input
slot2#flash:/a.txt for the
filename.
Remarks
Remarks