Specifying Supported Domain Name Delimiters; Displaying And Maintaining 802.1X; 802.1X Authentication Configuration Example; Network Requirements - HP 6125G Configuration Manual

Specifying supported domain name delimiters

By default, the access device supports the at sign (@) as the delimiter. You can also configure the access
device to accommodate 802.1X users that use other domain name delimiters.
The configurable delimiters include the at sign (@), back slash (\), and forward slash (/).
If an 802.1X username string contains multiple configured delimiters, the leftmost delimiter is the domain
name delimiter. For example, if you configure @, /, and \ as delimiters, the domain name delimiter for
the username string 123/22\@abc is the forward slash (/).
If a username string contains none of the delimiters, the access device authenticates the user in the
mandatory or default ISP domain. The access selects a domain delimiter from the delimiter set in this
order: @, /, and \.
Follow the steps to specify a set of domain name delimiters:
Step
1. Enter system view.
2. Specify a set of domain name
delimiters for 802.1X users.
NOTE:
If you configure the access device to include the domain name in the username sent to the RADIUS server,
make sure the domain delimiter in the username can be recognized by the RADIUS server. For username
format configuration, see the user-name-format command in

Displaying and maintaining 802.1X

Task
Display 802.1X session
information, statistics, or
configuration information of
specified or all ports.
Clear 802.1X statistics.

802.1X authentication configuration example

Network requirements

As shown in
GigabitEthernet 1/0/1. Implement MAC-based access control on the port, so the logoff of one user does
not affect other online 802.1X users.
Figure 33, the access device performs 802.1X authentication for users that connect to port
Command
system-view
dot1x domain-delimiter string
Command
display dot1x [ sessions | statistics ]
[ interface interface-list ] [ | { begin | exclude
| include } regular-expression ]
reset dot1x statistics [ interface interface-list ]
90
Remarks
N/A
Optional.
By default, only the at sign (@)
delimiter is supported.
Security Command Reference
Remarks
Available in any view
Available in user view
.