Displaying and maintaining 802.1X
Display 802.1X session
information, statistics, or
configuration information of
specified or all ports.
Clear 802.1X statistics.
802.1X authentication configuration example
As shown in
Ten-GigabitEthernet 1/1/5. Implement MAC-based access control on the port, so the logoff of one user
does not affect other online 802.1X users.
Use RADIUS servers to perform authentication, authorization, and accounting for the 802.1X users. If
RADIUS authentication fails, perform local authentication on the access device.
Configure the host at 10.1.1.1/24 as the primary authentication and accounting servers, and the host at
10.1.1.2/24 as the secondary authentication and accounting servers. Assign all users to the ISP domain
Configure the shared key as name for packets between the access device and the authentication server,
and the shared key as money for packets between the access device and the accounting server.
Figure 32 Network diagram
Configure the 802.1X client. If HP iNode is used, do not select the Carry version info option in the
client configuration. (Details not shown.)
Configure the RADIUS servers and add user accounts for the 802.1X users. (Details not shown.)
display dot1x [ sessions | statistics ] [ interface
interface-type interface-number ]
reset dot1x statistics [ interface interface-type
32, the access device performs 802.1X authentication for users that connect to port
Available in any view.
Available in user view.