Table of Contents
Advertisement
Figure 1-9 Network diagram for monitoring the master on the backup
Configuration procedure
# Configure Switch A.
<SwitchA> system-view
[SwitchA] interface vlan-interface 2
[SwitchA–vlan-interface2] ip address 192.168.0.101 24
[SwitchA–vlan-interface2] vrrp vrid 1 virtual-ip 192.168.0.10
[SwitchA–vlan-interface2] vrrp vrid 1 priority 110
[SwitchA–vlan-interface2] return
# Configure Switch B.
<SwitchB> system-view
[SwitchB] bfd session init-mode active
[SwitchB] bfd echo-source-ip 10.10.10.10
[SwitchB] interface vlan-interface 2
[SwitchB–vlan-interface2] ip address 192.168.0.102 24
[SwitchB–vlan-interface2] bfd min-echo-receive-interval 10
[SwitchB–vlan-interface2] bfd detect-multiplier 3
[SwitchB–vlan-interface2] quit
[SwitchB] track 1 bfd echo interface vlan-interface 2 remote ip 192.168.0.101 local ip
192.168.0.102
1-28
Advertisement
Chapters
Table of Contents
Troubleshooting
