Cli Features; Displaying And Maintaining Basic Configurations - HP 4800G Series Configuration Manual

You are recommended to use the default command level or modify the command level under the
guidance of professional staff; otherwise, the change of command level may bring inconvenience to
your maintenance and operation, or even potential security problem.

Displaying and Maintaining Basic Configurations

Display information on system version
Display information on the system clock
Display information on terminal users
Display the valid configuration under
current view
Display clipboard information
Display and save statistics of each
module's running status
During daily maintenance or when the system is operating abnormally, you need to view each module's
running status to find the problem. Therefore, you are required to execute the corresponding display
commands one by one. To collect more information one time, you can execute the display
diagnostic-information command in any view to display or save statistics of each module's running
status. The execution of the display diagnostic-information command has the same effect as that of
the commands display clock, display version, display device, and display current-configuration.
For the detailed description of the display users command, refer to Login Commands in the System
Volume.
Support for the display configure-user and display current-configuration command depends on the
device model.
The display commands discussed above are for the global configuration. Refer to the
corresponding section for the display command for specific protocol and interface.

CLI Features

This section covers the following topics:
Introduction to CLI
Online Help with Command Lines
Synchronous Information Output
Undo Form of a Command
To do... Use the command...
display version
display clock
display users [ all ]
display this [ by-linenum ]
display clipboard
display diagnostic-information
1-14
Remarks
Available in
any view