Console Port Login Configurations For Different Authentication Modes - HP 4800G Series Configuration Manual

Configuration
Changing of Console port configuration terminates the connection to the Console port. To establish the
connection again, you need to modify the configuration of the termination emulation utility running on
your PC accordingly. Refer to

Console Port Login Configurations for Different Authentication Modes

Table 2-3 lists Console port login configurations for different authentication modes.
Table 2-3 Console port login configurations for different authentication modes
Authentication
mode
None
Data bits databits { 5 | 6 | 7 | 8 }
Define a shortcut
escape-key { default |
key for terminating
character }
tasks.
Configure the type
of terminal display terminal type { ansi |
vt100 }
under the current
user interface.
Configure the
command level
available to the
user privilege level level
users logging in to
the AUX user
interface
Set the maximum
screen-length
number of lines the
screen-length
screen can contain
Set history
history-command
command buffer
max-size value
size
Set the timeout
idle-timeout minutes
time of a user
[ seconds ]
interface
Setting Up the Connection to the Console Port
Configuration
Configure not to authenticate users
Optional
The default data bits of a
Console port is 8.
Optional
By default, you can use Ctrl+C
to terminate a task.
Optional
By default, the terminal display
type is ANSI.
Optional
By default, commands of level 3
are available to the users
logging in to the AUX user
interface.
Optional
By default, the screen can
contain up to 24 lines.
Optional
By default, the history
command buffer can contain up
to 10 commands.
Optional
The default timeout time is 10
minutes.
Refer to
Configuration with Authentication
Mode Being None
2-4
Description
for details.
Description
Console Port Login
for details.