Displaying And Maintaining 802.1X; 802.1X Configuration Examples; 802.1X Authentication Configuration Example - HP 12500 Series Configuration Manual

NOTE:
If you configure the access device to include the domain name in the username sent to the RADIUS server,
make sure the domain delimiter in the username can be recognized by the RADIUS server. For username
format configuration, see the user-name-format command in

Displaying and maintaining 802.1X

Task
Display 802.1X session
information, statistics, or
configuration of specified or all
ports.
Clear 802.1X statistics.

802.1X configuration examples

NOTE:
By default, Ethernet interfaces, VLAN interfaces, and aggregate interfaces are in the state of DOWN. To
configure such an interface, use the undo shutdown command to bring it up first.

802.1X authentication configuration example

Network requirements
As shown in
GigabitEthernet 3/0/1. Implement MAC-based access control on the port, so the logoff of one user does
not affect other online 802.1X users.
Use RADIUS servers to perform authentication, authorization, and accounting for the 802.1X users. If
RADIUS authentication fails, perform local authentication on the access device. If RADIUS accounting
fails, the access device logs the user off.
Configure the host at 10.1.1.1/24 as the primary authentication and accounting servers, and the host at
10.1.1.2/24 as the secondary authentication and accounting servers. Assign all users to the ISP domain
aabbcc.net, which accommodates up to 30 users.
Configure the shared key as name for packets between the access device and the authentication server,
and as money for packets between the access device and the accounting server.
Figure 31, the access device performs 802.1X authentication for users that connect to port
Command
display dot1x [ sessions |
statistics ] [ interface interface-list ]
[ | { begin | exclude | include }
regular-expression ]
reset dot1x statistics [ interface
interface-list ]
89
Security Command Reference
Remarks
Available in any view.
Available in user view.
.