Program 92 - Initializing Misc. Backup Ram - Toshiba DK14 Programming Manual

Program 92 – Initializing Misc. Backup RAM
Processor Type:
Program Type:
Initialized Default:
✱ ✱ ✱ ✱
Enter programming SELECT = Press appropriate
mode. buttons as shown below.
Clears Station Speed Dial, Voice Mail ID Codes, and LCD memos
assigned to Station Speed Dial numbers.
Clears System Speed Dial and LCD memos assigned to System Speed
Dial numbers.
Clears Character Message Memory (Station and System) and User
Name/Number Display.
Clears Timed Reminders.
Resets digital telephone volume levels to initialized settings, specifically,
speaker volume levels for Internal Calls [DN], Tone/BGM, Busy Override
(muted ring), and Ring volume to approximately mid-range on all DKTs.
Program 92-5 does not affect digital telephone handset receiver volume
levels. Use Program 27 to set off-hook digital telephone handset
receiver volume levels.
Program 92 Overview
Program 92 clears all previously entered or random data (of the type listed) but does not clear data
in system Programs 00~ 99.
You must run Program 92 when first installing the system or an RCTU; if you
CAUTION!
do not, the system could begin to operate erratically.
Running Program 91-9 automatically runs Program 92 (1~9) to erase customer
data.
Notes
Running Program 92-5 does not affect digital telephone handset receiver volume levels. Use
G
Program 27 to set off-hook handset receiver volume levels for digital telephones.
Strata DK Programming 5/00
DK14, DK40i, all RCTUs and BCUs
Initialization - Includes: Initializing Speed Dial Number, VM ID Codes, Character
Message Memory, Timed Reminders, Digital Telephone Volume, Called ID, ANI, and
Call Forward Backup RAM
See individual programs
Clear more data
Power Off 5 Clears Call Forward and Message Waiting Memory
seconds; then (all stations). Program 92-9 does not affect Call
Power On Forward External or Fixed Call Forward settings.
Program 92 – Initializing Misc. Backup RAM
End Program 92. Exit programming
mode.
Initialization & Test
2-9