Program 01 - Station Logical Port Display And/Or Change - Toshiba DK14 Programming Manual

System & Station
This chapter gives you programming information for the Strata DK system and its stations.
Program 01 – Station Logical Port Display and/or
Change
Processor Type:
Program Type:
Initialized Default:
✱ ✱ ✱ ✱
SELECT = Physical Port Number
The logical port number associated with
the physical port displays after the
physical port number is entered.
Program 01 Overview
Program 01 enables you to enter a physical port to display the associated logical port. You then
have the option to assign a new logical port to the physical port. (To return ports to their initialized
settings, see Programs 90 and 91.)
Record port locations on Program 04 record sheet.
Note
Strata DK Programming 5/00
DK14, DK40i, all RCTUs and BCUs
Station
Logical port number = physical port number
Program 90, 91-1, or 91-9 initializes Program 01
To Save existing Logical Port
Processor [PDN] Port Range
DK14 000~009
DK40i 000~027
RCTUA 000~031
RCTUBA/BB 000~079
RCTUC/D 000~239
RCTUE/F 000~335
Enter new Logical Port
to change existing Logical Port
Processor [PDN] Port Range
B1CU 000~055
B2CAU/BU 000~111
B3CAU/BU 000~191
B5CAU/BU 000~335
3
3-1