Toshiba DK14 Programming Manual page 85

Strata dk digital business telephone
Table of Contents

Advertisement

Table 3-1
DTMF Buffers
The ports used for buffer memory are not available for telephones. The ports are
Important!
automatically assigned from the highest numbered port down, for the number of
ports used. Example, if four ports are needed as buffers in an RCTUC/D, then ports
239, 238, 237 and 236 will not be viable for telephones.
The first port that uses memory for this feature, by processor:
DK40i = 027
RCTUA = 032
RCTUBA/BB, B1CU = 079
RCTUC/D, B2CAU/BU, B3CAU/BU = 239
RCTUE/F, B5CAU/BU = 335
To assign a TR/LCR class of service to Tie lines receiving the incoming call, the Tie lines must be
placed in a CO line group in Program 16. Each Tie line can be assigned to different groups but an
individual Tie line can only be assigned to one group.
Once a Tie line is assigned to a line group in Program 16, it must be assigned a class of service in
the appropriate programs: 30, 40, 41, 43, 48 and 56. In these programs, ports 900~916 must match
the appropriate Tie line group number 01~16, respectively.
Example: Program 48-901#100, is the Program 48 assignment for all Tie lines in trunk group 01.
Strata DK Programming
5/00
DTMF/
LED 19
LED 18
Buffers
0
Off
4
Off
8
Off
12
Off
16
On
20
On
24
On
Note
LEDs 19,18 17 Off disables the
feature.
Port Number
Program 16 Line Group Number
900
901
.
.
.
916
Program 10-4 – ACD/ISDN/Tandem Parameters
LED 17
Off
Off
Off
On
On
Off
Off
On
Off
Off
On
On
On
Off
00
01
.
.
.
16
System & Station
3-41

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dk40iDk424Dk424i

Table of Contents