Program 77-1 - Peripheral Options (Door Phones) - Toshiba DK14 Programming Manual

System & Station
Program 77-1 – Peripheral Options (Door Phones)
Program 77-1 – Peripheral Options (Door Phones)
RSIU / RSIS / RMDS, PIOU/PIOUS / IMDU, PEPU
Processor Type:
Program Type:
Initialized Default:
✱ ✱ ✱ ✱
LED/
X
Button
20
19
18
17
16
15
14
10
08
07
06
05
04
03
02
01
3-164
DK14, DK40i, all RCTUs and BCUs
System
All LEDs are Off
SELECT = 1
LED On
Door Lock Time/6 seconds
Port 028/DDCB 4 or HDCB 4 (DK424, DK424i)
Port 020/DDCB 3 or HDCB 3 (DK40i, DK424,
DK424i)
Port 012/DDCB 2 or HDCB 2 (DK424)
Port 012/DDCB 2 or HDCB 2 (DK40i
Expansion Unit)
Port 003/DDCB 2 (DK14)
Port 004/DDCB 1 or HDCB 1 (DK424, DK424i)
Port 004/DDCB 1 (DK40i)
Port 002/DDCB 1 (DK14)
RMDS Modem Protocol CCIT (2400 bps)
RMDS/IMDU Modem (DN #19)/Enabled
Enable DKi Admin/DKi Backup ACK/NAC
Protocol
Door Phone Ring on External Page in Night
Mode
Door Lock Relay Enabled
NT Relay with NT1 and NT2 Button and
Ringing CO Line
MOH Relay Enabled
—
—
LED 02 applies to DK14 or DK40i only.
LED 01 has priority.
LED 01 applies to DK14 or DK40i only.
MOH on Base Unit Relay Enabled
Light the LED Buttons that are
marked with an X in the table below.
Door Lock Time/3 seconds
Port 028/Telephone (DK424)
Port 020/Telephone (DK40i/DK424)
Port 012/Telephone (DK40i Expansion Unit,
DK424).
Port 003/Telephone (DK14).
Port 004/Telephone (DK40i, DK424, DK424i).
Port 002/Telephone (DK14).
RMDS Modem Protocol Bell212A (1200 bps)
RMDS/IMDU Modem (DN #19)/Disabled
Disable DKi Admin/DKi Backup ACK/NAC
Protocol
No Ring on External Page in Night Mode
External Page Relay Enabled
NT Relay Steady with NT1 Button (DK424
and DK424i only)
NT Relay Enabled
External Page on Base Unit Relay Enabled
NT on Base Unit Relay Enabled
LED Off
—
—
Strata DK Programming 5/00