Program 45-8~9 - Toll Restriction Override Code - Toshiba DK14 Programming Manual

Toll Restriction
Program 45-8~9 – Toll Restriction Override Code
Program 45-8~9 – Toll Restriction Override Code
Processor Type:
Program Type:
Initialized Default:
✱ ✱ ✱ ✱
SELECT =
8 (Code 1)
9 (Code 2)
Program 45-8~9 Overview
This program enables selected stations in the system to alter the override code. These stations are
defined by their users - specified in Program 30, Button/LED 09.
Two different codes can be dialed by any station user to override station-specific restrictions.
These codes will not register on SMDR.
To change the codes from selected stations:
Code 1: [PDN] +
Code 2: [PDN] +
Notes
Do not use the same four-digit codes set in Program 44-1~8, Toll Restriction/Traveling Class
G
Override codes.
Program 45 (8~9) overrides Program 44-1~8 if the same codes are used.
G
Electronic telephone users can use the button instead of the
G
Verified Account Codes (Forced or Voluntary) can also be used to override Toll Restriction on
G
a call by call basis. When used for this function, the account code will register on the SMDR
report (see Programs 69 and 70).
4-22
DK14, DK40i, all RCTUs and BCUs
Toll Restriction
Leaves code assignments blank
SELECT = Item 8 or 9
Enter 8 to select Code 1.
Enter 9 to select Code 2.
Description
+ code +
+ code +
DATA = Code
Enter 1 to 4-digit code from the table below.
Press LED Button 01 to delete or leave a blank.
Press LED Button 02 to allow all digits to work.
DATA = (1 to 4 Digits)
Strata DK Programming
button.
5/00