Toshiba DK14 Programming Manual page 147

Table 3-2 ISDN Immediate Dialing for Call Types (continued)
Call Type
Equal Access
Service Access
Code
Special DIal
Immediate Dialing complies with NANP; therefore, it doesn't apply when:
o the number of digits dialed are not fixed (as in an international call)
the dialed number competes with other types of calls, such as operator or credit calls
o
a special dialing number system is provided by the telephone company, such as class of
o
service.
Immediate Dialing also does not work for:
o DNIS network routing (see Program 72)
o DISA external connection features
o CF-EXT
Also, if a number that is Toll Restricted is dialed, the call will be blocked.
For LCR, the SETUP message is sent out without requiring the
in "Program 55 – LCR Modified Digits Table" on Page
Speed Dial/Redial can be used to make immediate outgoing calls act like ISDN Immediate Dialing
calls—see "Program 10-4 – ACD/ISDN/Tandem Parameters" on Page
LEDs 13 and 14: Toll Restriction After Answer
These two LEDs determine whether or not a toll restricted telephone user is allowed to use one
touch speed dial buttons after answering an incoming CO line call. LED 13 and 14 should be
turned On for Toll Restricted Telephones that must answer incoming CO line calls and use
(speed dial) buttons programmed to perform functions that Hold or Park calls and access the page
system automatically.
LED 13 LED 14
Off Off
On Off
Off On
Initialized data sets both LEDs 13 and 14 off for all telephone users (not allowed to use Speed Dial
buttons after answering incoming CO line calls).
LED 07~12
Not used at this time.
Strata DK Programming 5/00
Program Number Dialed from Station
45-1-7 Equal Access + National
10XXX
Equal Access + OAC
45-1-8
Equal Access + Local
1010XXX
Equal Access + Credit
Equal Access + International
1015XXX
1015XXX
Equal Access + Operator
45-1-9
101XXX
✱XX Ext. ✱69 (Return Call)
50-3 N11
Not allowed to use Speed Dial after answering a line call.
Allowed to use Speed Dial buttons but subject to toll restriction tables.
Allowed to use Speed Dial buttons and not subject to toll restriction.
Program 35 – Station Class of Service
ISDN Immediate Dialing Available
Yes
No
No due to an insufficient number of digits.
Yes
button if
5-19.
6-6, LED 14.
Description
System & Station
is registered
3-103