Program *41 For Dk424 - T1 Assignment Series (Part 1) - Toshiba DK14 Programming Manual

System & Station
Program *41 for DK424 – T1 Assignment Series (Part 1)
Program *41 for DK424 – T1 Assignment Series (Part 1)
Processor Type:
Program Type:
Initialized Default:
Series Overview
Use Program *41 (Part 1) and *42 (Part 2) series to set T1 parameters and assignments on the
DK424. See the Strata DK Configuration and T1 sections for additional T1 information. RDTU
support is as follows:
Program *41-1 – T1 Span (RDTU) Frame and Line Code Assignments
Initialized Default:
✱ ✱ ✱ ✱
T1 Span
1 RDTU
2 RDTU
3 RDTU
4 RDTU
5 RDTU
6 RDTU
7 RDTU
8 RDTU
Program *41-1 Overview
T1 Span Framing Assignments: Each RDTU PCB can be individually assigned for Superframe
(LED 01 Off) or Extended Superframe (LED 01 On).
T1 Span Line Code Assignments: Each RDTU PCB can be individually assigned for B8ZS
(LED 02 On) or AMI coding (LED 02 Off).
3-126
RCTUBA/BB, RCTUC/D, RCTUE/F, B1CU, B2CAU/BU, B3CAU/BU and B5CAU/BU
System
See each program
Processor
RCTUBA/BB, B1CU
RCTUC/D, B2CAU/BU, B3CAU/BU
RCTUE/F, B5CAU/BU
LED 01 and LED 02 Off for all T1 span lines
✱
SELECT = 1
Select the RDTU being
programmed (1~8)
Extended Superframe
LED 01 On
Number of RDTU's
Supported
LEDs 01 and 02
Set as described below.
Superframe
LED 01 Off LED 02 On
2
6
8
B8ZS AMI Code
LED 02 Off
Strata DK Programming 5/00