Toshiba DK14 Programming Manual page 138

System & Station
Program 33 – [PDN]/ [PhDN] Station Hunting (Voice Calls Only)
On Ring-first systems, if a [PDN] appears on more than one button (on owner's telephone), the
DK will not hunt until all appearances of the [PDN] are in use.
On Voice-first systems, the system will hunt for an available station if any one of the [PDN]
appearances is busy.
Program 33 - Example
1. Use the programming LCD electronic or digital telephone connected to
physical port 005 - circuit 6.
Make sure the programming button strip template is installed on the
programming telephone. (See "Program 38 Digital and Electronic
Telephone Keystrip Type" on Page 3-109.)
✱ ✱ ✱ ✱
2.
Enter programming mode. (Do not press [DN] button.)
3.
Access Program 33. System beeps after
to indicate program number may be entered.
4.
Prepare the system for a station port selection.
5. ~ or
Select the port number of the Hunt From station. A range of ports can
be entered as specified on the record sheet. After the Hunt From port
is entered, press the
6. ~ or
Enter the port number of the Hunt To point, as recorded on the system
record sheet. Press LED button 01 to delete a digit from Hunt To point
ports.
7.
Secure data in system programming.
8.
Prepare system for another selection (go back to Step 5), or exit
Program 33 (continue with Step 9).
9.
Secure Program 33 data in system memory.
10.
Exit Program 33. Enter another program number or exit programming
mode (go to Step 11). Speaker beeps to indicate it is exiting
Program 33.
11.
Exit programming mode.
1. N-N = Program telephone [PDN]
3-94
Action (press buttons+LED buttons)
~
button. Do not press
~
Jan 20 Sun
Program Mode
Program = 33
is pressed
33 Select =
33 Select = (000~335)
Hunt To =
when entering a range.
33 Select = (000~335)
Hunt
33 Select = (000~335)
Data Programmed
33 Select = ##
33 Select =
Data Programmed
Program =
Jan 20 Sun
LCD Response
No. N-N
06:43
Data Store
To = (000~335)
No. N-N
06:58
Strata DK Programming
1
5/00