Toshiba DK14 Programming Manual page 187

Table 3-8 Additional Feature Button Codes (continued)
Button Function
Call Park and Page Call Park/Page or CP/PG
Call Pickup (Directed) Directed Pickup or PKUP
Call Pickup (Group)4 Group Pickup
Do Not Disturb Do Not Disturb or DND
ISDN Sub-address Sub-address
ISDN Start Start
LCD Message Select LCD Msg Select or LCD M
Night Transfer Lock
Night Lock1 or NT1 L1~Night Lock4
Tenant 1~Night Transfer
or NT4 L4
Lock Tenant 4
Release and Answer Release and Ans and RLS/ANS
Save Last Dialed Number Save Last Number or SAVE
Station Speed Dial Codes SD
System Speed Dial Codes SD
Tone Tone Dial Select or TONE
116
Notes
See Program *15 for Tenant Group assignments.
G
Picks up calls to telephones in any call pickup group to which the telephone is assigned in
G
Program *31.
Attendant consoles cannot be equipped with [SDNs] or [PhDNs]. The console [DN] is
G
assigned to the console port number in Program 04. The console's [DN] can have only one
appearance.
Attendant consoles cannot be equipped with [PDNs], [SDNs], or [PhDNs]. The [In-DN]
G
button is the console's [DN], assigned in Program 04; it supports incoming calls only and can
only appear once on a console.
Strata DK Programming 5/00
Button Labels
431~434
*10~*49
*10~*49
*100~*139
*600~*699
*600~*699
*200~*999
Program 59 – Attendant Console Flexible Button Codes
Code Notes
463 Parking and Paging Park Pickup.
Picks up ringing or held intercom, trunk
484
calls, and page.
Picks up a call to any group to which
480
station is assigned in *31.
498 Prevents calls to station.
Separates the called party's ISDN sub-
address from the called party number.
467
The digit performs this function on
standard telephones.
Initiates DK to send dialed digits to the
ISDN network when this button is pressed
from a digital or electronic telephone.
469
Program *63-2 invokes the same function
when the Dial Timer expires. Also see
Tone Button in this table.
481 Begins LCD message selection.
Used to lock system ringing mode: DAY,
DAY2, NIGHT See Programs 74 and *36
for NT Lock Password assignments.
Simulates On-hook/Off-hook operation to
466 release an existing call and answer new
incoming/ringing call.
Saves last number dialed for future speed
485
dial.
Reserves button for station speed dial for
the following processors:
RCTUBA/BB,
B1CU
RCTUC/D
, B2CAU/BU, B3CAU/BU
RCTUE/F
, B5CAU/BU
Speed dial number is set by station port
000.
RCTUBA/BB,
B1CU
RCTUC/D
, B2CAU/BU, B3CAU/BU
RCTUE/F
, B5CAU/BU
CO dial signals set to tone or pulse.
For ISDN applications, after the user
490
presses the Tone Dial Select button, any
digits dialed after it is will be sent using
DTMF tones.
System & Station
3-143