Toshiba DK14 Programming Manual page 166

System & Station
Program 39 – Flexible Button Assignments
Alert Signal Button Assignments
✱ ✱ ✱ ✱
Enter the logical port number of the
telephone that will be assigned an
Station Number: _______
Alert Signal Button
No. Code
1 427
2 428
3 429
4 430
Station Number: _______
Alert Signal Button
No. Code
1 427
2 428
3 429
4 430
The Alert Signal is four short bursts of tone, sent two times/three seconds apart from one partner
station when the other partner station when one of the partners presses the
their telephone. An Alert Signal can be sent to stations that are idle or busy, or in Call Forward or
Do Not Disturb mode. No talk path will exist before or after the Alert Signal is activated.
Important!
Both partner stations must have the same Alert Signal button number programmed in Program
G
39 and the appropriate Speed Dial Number programmed to allow the Alert Signal buttons to
operate.
Strata AirLink does not support this feature.
G
3-122
button.
Button Number (01~20)
Button Number (01~20)
YYY = the Program 39 code for the
button that should be installed.
Press the telephone button to which
should be assigned.
Alert Signal Button Partner Station
Speed Dial Number
Alert Signal Button Partner Station
Speed Dial Number
Number
Number
button on
Strata DK Programming 5/00