Program 60-1 - Smdr Data Output Options - Toshiba DK14 Programming Manual

System & Station
Program 60-1 – SMDR Data Output Options
Program 60-1 – SMDR Data Output Options
Processor Type:
Program Type:
Initialized Default:
✱ ✱ ✱ ✱
LED/
X
Button
20
19
18
17
16
15
14
13
12
11
10
09
08
07
06
05
04
03
02
01
Program 60-1 Overview
Program 60-1 determines which information will be sent out the system SMDR port: System
Account codes or Caller ID and/or ANI telephone numbers.
Turn LED 01 On if received Caller ID and/or ANI information should be sent out the system
SMDR port.
Turn LED 01 Off if Account Code information should be sent out the system SMDR port.
Note
3-144
DK14, DK40i, all RCTUs and BCUs
System
LED 01 Off
SELECT = 1
LED On
Caller ID, ANI and DNIS data will be sent from the
system SMDR port
LED 01 determines if received Caller ID and/or ANI information (LED 01 On) or data is
sent out the SMDR port. This data is output on the last 15-digit (right hand) field columns
of the SMDR print out.
Light the LED Buttons that are marked
with an X in the table below.
Account code data will be sent from the system
SMDR port
LED Off
Strata DK Programming 5/00