Program 16 - Assign Co Line Groups - Toshiba DK14 Programming Manual

Strata dk digital business telephone
Table of Contents

Advertisement

ISDN
Program 16 – Assign CO Line Groups
Program * 67-4 – ISDN Trunk Groups Maximum Channel Reservation. This program sets the
maximum number of B-channels for a given trunk group. The maximum number determines the
number of available B-channels available from the total shared channels.
Important!
Program 16 – Assign CO Line Groups
This program assigns CO line groups (or Dial 9 groups). Refer to this program only for BRI lines.
Do not make changes to trunk groups assigned in Program *16 as PRI type. These will be assigned
automatically when PRI programming is entered. The system record sheet is on
manual.
7-14
To allow Strata DK Automatic Callback (ACB) and trunk queuing to function
when using trunk group or LCR access codes to make an outgoing call, the
maximum value for a trunk group (i.e., Tie line group) should not exceed the
number of lines ordered from the Central Office for that facility's trunk group.
Page 3-51
of this
Strata DK Programming
5/00

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dk40iDk424Dk424i

Table of Contents