Program 37 - Ring Transfer (Camp-On) Recall Time - Toshiba DK14 Programming Manual

Program 37 – Ring Transfer (Camp-on) Recall Time
Processor Type:
Program Type:
Initialized Default:
✱ ✱ ✱ ✱
SELECT = Station Logical Port Number
Enter the port number that needs a Ring Transfer Recall
Time assigned.
To add a port range, enter XXX✱XXX (low port ✱ high port).
Processor Type
DK14
DK40i
RCTUA
RCTUBA/BB
RCTUC/D
RCTUE/F
Port Hold Time
Program 37 Overview
If a busy or ringing station does not answer a call sent to it via ring (blind) call transfer (lines or
[DNs]), the station originating the ring (blind) transfer is recalled after an amount of time
determined with this program. This time (011~999 seconds) is set independently for each
originating station port. Initialized data sets all stations for a 032-second recall time. Ring Transfer
must first be enabled for the system with Program 10-1, LED 07 On.
Strata DK Programming 5/00
DK14, DK40i, all RCTUs and BCUs
Station
Assigns Ring Transfer Recall Time of 32 seconds to all ports
Port Range
000~009
000~027
000~031
000~079
000~239
000~335
Port Hold Time
Program 37 – Ring Transfer (Camp-on) Recall Time
HOLD TIME = Port Number
Enter the Ring Transfer Recall Time (three
digits, in seconds)
Enter 011~999 for 11 to 999 seconds.
Processor Type Port Range
B1CU 000~055
B2CAU/BU 000~111
B3CAU/BU 000~191
B5CAU/BU 000~335
Port Hold Time
System & Station
Port Hold Time
3-107