Program 32 - Automatic Preference - Toshiba DK14 Programming Manual

System & Station
Program 32 – Automatic Preference
Program 32 – Automatic Preference
Processor Type:
Program Type:
Initialized Default:
✱ ✱ ✱ ✱
SELECT = Station Logical Port Number
Enter the port number of the station having
preference defined. To add a port range,
enter XXX✱XXX (low port ✱ high port).
DATA = Ringing Code
0 = Disable Ringing Line Preference
1 = Enable Ringing Line Preference
Processor Type Port Range Number of CO Line Groups
DK14
DK40i
RCTUA
RCTUBA/BB
RCTUC/D
RCTUE/F
Port Number
3-90
DK14, DK40i, all RCTUs and BCUs
Station
Assigns Ringing Code 1 and Automatic Off-hook (Preference) Code 00 for all ports
000~009 01~04
000~027 01~08
000~031 01~08
000~079 01~08
000~239 01~16
000~335 01~16
Automatic
Ringing Code
Preference Code
Automatic Preference Code:
00 = No selection
01 = [PDN]
02 = Lowest CO, Tie, or DID line
11~26 = 01~16 Line groups
(See legend below for maximum line groups.)
Processor Type Port Range Number of CO Line Groups
B1CU 000~055
B2CAU/BU 000~111
B3CAU/BU 000~191
B5CAU/BU 000~335
Port Number Ringing Code
Strata DK Programming
01~08
01~16
01~16
01~16
Automatic
Preference Code
5/00