Toshiba DK14 Programming Manual page 61

Program 04 Example
Action (press buttons+LED buttons)
1. Use an LCD programming phone per Minimum Hardware
Requirements in Chapter 1 - Overview.
✱ ✱ ✱ ✱
2.
Enter programming mode. (Do not press the [DN] button.)
3.
Access Program 04. The speaker beeps to indicate when to enter a
program number.
4.
Prepare the system for a selection.
5.
Select a port number (use three digits plus #).
6.
Enter the port's station number (up to four digits) from the record
sheet.
Note Station numbers must not exceed four digits, or conflict with
feature access codes listed in Program 05 record sheet.
7.
Secure data in system programming.
8.
Prepare the system for another selection (go back to Step 5) or
continue with Step 9.
9.
Secure Program 04 data in system memory.
10.
Exit Program 04 (system beeps). Enter another program number or
continue with Step 11.
11.
Exit programming mode.
1. N-N = program telephone [PDN]
Strata DK Programming 5/00
Program 04 – Station Logical Port [PDN] Assignment
LCD Response
Jan 20 Sun
Program Mode
Program = 04
04 Select =
04 Select = 000
INT = N-N
04 Select = 000 ~239
INT = XXXX
04 Select = (000~335)
Data Programmed
04 Select =
00 Select = ##
Data Programmed
Program =
Jan 20 Sun
System & Station
1
No. N-N
06:43
Data Store
No. N-N
06:58
3-17