Program *69-1 - Cnis Presentation Parameters - Toshiba DK14 Programming Manual

Strata dk digital business telephone
Table of Contents

Advertisement

Program *69-1 – CNIS Presentation Parameters
Processor Type:
Program Type:
Initialized Default:
Program *69-1 Overview
This program defaults all ports to the 00 index, which means that outgoing calls will present the
Directory Number entered in Program *68-2 as the Calling Number for outbound calls. Each
station on the Strata DK can send a unique number based on the station making the call assigning
an index other than 00, and entering the number as Type 2 to be used in Program *69-2 or send a
Type 1 DID number by entering a prefix code to create a complete number.
Note
If the PSTN is to use this number for billing the call, the number sent must match those
provided by the PSTN.
Strata DK Programming
5/00
DK40i, all RCTUs (Release 4.0 or higher) and BCUs
Trunk, PRI and BRI
None
SEL = 1
Enter Station Port(s)
To add a range, enter
XXX*XXX (low port * high port)
CG = Channel Group (1~8)
Station Ports
Program *69-1 – CNIS Presentation Parameters
INDX = Index Number (00~32)
Index 00 uses default value assigned in*68-2.
All others use values assigned in *69-2
Channel
Group
ISDN
Index
7-43

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dk40iDk424Dk424i

Table of Contents