Toshiba DK14 Programming Manual page 68

System & Station
Program 09 – Built-in Auto Attendant Prompt / Station Assignments
➤
To create one-digit dialing prompts and to assign the associated destination station numbers
1. Enter Program 09.
2. When "SELECT" appears on the LCD, press the desired digit (prompt). Then "AUTO ATT
DIAL" appears on the LCD.
3. Enter the destination DH or station [PDN] (not Port number) number or
group (per Note) associated with the prompts and then the
4. Press
➤
To enter two-digit dialing prompts along with their destination station numbers
1. Enter Program 09 and then see "SELECT" on the LCD.
2. Press the desired leading digit then see "AUTO ATT DIAL" on the LCD.
3. Press
will again appear on the LCD.
4. Press
5. Enter the destination station [DN] assigned to the two-digit prompt and then the
6. To complete more prompt-station entries, repeat Steps 4 and 6.
➤
To assign a digit (menu prompt) to an ACD Group
➤
Enter
where XX is the ACD Group number 01~16.
Note
3-24
and repeat Steps 2 and 3 for more prompt-station entries.
✱
and then the button. The first digit will now be set, and "DATA PROGRAMED"
and press a second digit, and then see "AUTO ATT DIAL" on the LCD.
in place of the [DN]) at the "AUTO ATT DIAL" LCD programming prompt,
When transmission and DTMF levels are lower than normal or when the digital
announcement voice frequencies match DTMF digital frequencies (talk-off), Auto
Attendant efficiency may be improved with two-digit dialing options, instead of one-digit
dialing options.
plus the ACD
button.
button.
Strata DK Programming 5/00