Smdr Printer/Call Accounting Device Options; Night Ringing Over Selected Page Zones - Toshiba strata CT Installation & Maintenance Manual

Peripheral Installation

Night Ringing over Selected Page Zones

In systems shared by 1~4 tenants, each tenant's Exchange lines can be assigned to night ring
separate PIOU external page zones. This feature can also be used in one-tenant systems.
With shared systems, for example, Tenant 1's night ringing Exchange lines could be
programmed to ring PIOU external page zones 1 and 2, while Tenant 2's lines could be
programmed to ring zones 3 and 4. In non-shared systems, night ringing Exchange lines can
be assigned to ring all of the zones or just selected zones.
Programming Exchange Lines to Ring Selected PIOU Page
Zones
Program 78-1: Assigns Exchange lines, Tenant 1 through Tenant 4, that will night ring over
PIOU external page zones.
Program *15: Assigns Exchange lines to Tenant 1 through Tenant 4. Lines are initialised as
Tenant 1.
Program 77-3: Assigns Tenant 1 through Tenant 4 Exchange lines to night ring specific PIOU
external page zones.
Program 39: Assigns appropriate Night Transfer and Tenant Pick-up (for Tenant or
Non-Tenant systems) buttons to electronic and digital telephones.
Note
H
PIOU Zone Paging Installation
See
installation instructions.
C

SMDR Printer/Call Accounting Device Options

An SMDR printer or call accounting device may be connected to the system to provide a
hard-copy record of station activity. The Strata CT system can record incoming, outgoing,
and transferred calls, as well as Account Code entries and names and telephone numbers of
answered DDI and ISDN calls. Call record data is printed out at the completion of each
eligible call. SMDR format is ASCII-formatted, 8-bits, no parity, 1-stop bit.
To support the SMDR printer/call accounting device option, a Strata CT system must be
equipped with a PIOU, PIOUS,...or
N
Connection of the printer or call accounting device to the PIOU, PIOUS, RSIU/RSIS PCB is
accomplished with a 3-pair modular cord (seven feet maximum) and a TTY-PC-CABLE/
PPTCIA-3M connector adapter
Note
The PIOU, PIOUS and RSIU/RSIS contain a call record buffer which stores call record data
(up to 50 calls) when the printed or call accounting device is turned Off, or when no device is
connected to the SMDR port. No further call records are stored after the buffer is filled. When
the printer or call accounting device is made operational, "ERROR BUFFER OVERFLOW"
prints out to indicate the buffer was full, and that some call information may have been lost.
6-34
Any station can pick up Exchange lines that night ring over external page zones by
pressing the [PDN] and dialling #59.
"External Page Option Installation" on Page
For Strata CT only, a RSIU/RSIS, PIOU, and PIOUS
PIOU, PIOUS will be 300 or 1200 bps (see
RSIU/RSIS can be 1200~9600 bps (see Program 76).
6-28, paragraph 4 and
(Figure 6-21, "PIOU/PIOUS SMDR Cable
Chapter 3 – Universal Slot
Strata CT I&M Manual October 2000
Figure 6-18 for
Connections").
PCBs);