Camp-On Transfer; Consultation Hold; Do Not Disturb; Eight Party Conference - Toshiba Perception 4000 Quick Reference Manual

I

CAMP-ON TRANSFER

To Perform a Camp-on Transfer
I
Establish a two-way connection.
I
Press the hookswitch, listen for recall dial tone,
and dial the number of the destination that is to
receive the call.
I
After receiving busy tone, wait on the line for
busy tone to change to success tone.
I
Hang-up. This will camp the transferred call onto
the busy line.
I

CONSULTATION HOLD

To Consult with a Third Party:
I
Establish a two-way connection.
I
Press the hookswitch and listen for recall dial
tone.
I
Dial the number of the third party and listen for
ringback tone.
I
After the called party answers and you are
through consulting, you can return to the held
party by pressing the hookswitch twice. This will
automatically disconnect the called party.
I

DO NOT DISTURB

To Register Do Not Disturb:
Enter the Do Not Disturb access
I
code ______.
I
Listen for success tone.
To Cancel Do Not Disturb:
Enter the Do Not Disturb Cancellation
I
access code ______.
I
Listen for success tone.
I

EIGHT PARTY CONFERENCE

To Set up a Conference of up to Eight
Members:
I
Establish a two-way connection.
Press the hookswitch and enter the Eight
I
Party Conference access code ______.
I
Listen for recall dial tone.
I
Dial the number of the third party and listen for
ringback tone. If the called party is busy or does
not answer, press the hookswitch to return to
the held party.
I
When the called party answers, press the
hookswitch to form a three-way conference.
I
To add each additional party, press the
hookswitch, listen for recall dial tone, and dial
the number of the desired party. (6)
I
Listen for ringback tone and wait for the called
party to answer. (7)
S TA N D A R D T E L E P H O N E
Q U I C K R E F E R E N C E
-4-
G U I D E