Link Aggregation And Lacp Configuration Example - HP 830 Series Configuration Manual

Poe+ unified wired-wlan switch switching engine web-based
Hide thumbs Also See for HP 830 Series:
Table of Contents

Advertisement

Field
Partner Port State
Oper Key
Table 65 Field description
Field
Unit
Port
Partner ID
Partner Port Priority
Partner Oper Key

Link aggregation and LACP configuration example

Network requirements
As shown in
incoming/outgoing traffic across the member ports.
Figure 175 Network diagram
Description
State information of the peer port:
A—Indicates that LACP is enabled.
B—Indicates that LACP short timeout has occurred. If B does not appear, it
—Indicates that LACP long timeout has occurred.
C—Indicates that the link is considered aggregatable by the sending
system.
D—Indicates that the link is considered as synchronized by the sending
system.
E—Indicates that the sending system considers that collection of incoming
frames is enabled on the link.
F—Indicates that the sending system considers that distribution of outgoing
frames is enabled on the link.
G—Indicates that the receive state machine of the sending system is using
the default operational partner information.
H—Indicates that the receive state machine of the sending system is in
expired state.
Operational key of the local port.
Figure
175, aggregate the ports on each device to form a link aggregation group, balancing
Description
Number of the remote system.
Name of the remote port.
LACP priority and MAC address of the remote system.
LACP priority of the remote port.
Operational key of the remote port.
190

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents