Figure 89 Setup page
2.
Configure SNMP settings on the upper part of the page as described in
3.
Click Apply.
Table 33 Configuration items
Item
SNMP
Local Engine ID
Maximum Packet Size
Contact
Location
Description
Specify to enable or disable SNMP agent.
Configure the local engine ID.
The validity of a user after it is created depends on the engine ID of the SNMP
agent. If the engine ID when the user is created is not identical to the current
engine ID, the user is invalid.
Configure the maximum size of an SNMP packet that the agent can receive or
send.
Set a character string to describe contact information for system maintenance.
Set a character string to describe the physical location of the device.
101
Table
33.