HP 830 Series Configuration Manual page 477

Figure 475 Configuring a rule for an advanced IPv6 ACL
3. Add a rule for an advanced IPv6 ACL as described in
4. Click Add.
Table 142 Configuration items
Item
Select Access Control List (ACL)
Rule ID
Operation
Description
Select the advanced IPv6 ACL for which you want to configure rules.
Select the Rule ID box and enter a number for the rule.
If you do not specify the rule number, the system will assign one
automatically.
If the rule number you specify already exists, this procedure modifies
the configuration of the existing rule.
Select the operation to be performed for IPv6 packets matching the
rule:
•
Permit—Allows matched packets to pass.
•
Deny—Drops matched packets.
465
Table 142.