Configuring Authorization Methods For The Isp Domain - HP 830 Series Configuration Manual

Poe+ unified wired-wlan switch switching engine web-based
Hide thumbs Also See for HP 830 Series:
Table of Contents

Advertisement

Configuring authorization methods for the ISP
domain
1.
Select Authentication > AAA from the navigation tree.
2.
Click the Authorization tab.
Figure 408 Authorization method configuration page
3.
Select an ISP domain and specify authorization methods for the ISP domain, as described in
117.
4.
Click Apply.
Table 117 Configuration items
Item
Select an ISP domain
Default AuthZ
Name
Secondary Method
LAN-access AuthZ
Name
Secondary Method
Description
Select the ISP domain for which you want to specify authentication methods.
Configure the default authorization method and secondary authorization method for
all types of users by using one of the following options:
HWTACACS—HWTACACS authorization. You must specify the HWTACACS
scheme to be used.
Local—Local authorization (default setting).
None—This method trusts all users and assigns default rights to them.
RADIUS—RADIUS authorization. You must specify the RADIUS scheme to be used.
Not Set—The device uses the default authorization setting, which is local
authorization.
Configure the authorization method and secondary authorization method for LAN
access users by using one of the following options:
Local—Local authorization.
None—This method trusts all users and assigns default rights to them.
RADIUS—RADIUS authorization. You must specify the RADIUS scheme to be used.
Not Set—The device uses the settings in the Default AuthZ area for LAN access
users.
394
Table

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents